Monday, 15 August 2022

Mobile Suit Ensemble Part 19


Wave 19 was the third out of four 6-figure retail Ensemble waves and originally hit the store shelves in October 2021. It has taken me a considerable bit of patience to source all the figures needed for the full review. Initially I was mainly concerned that it would be difficult to find the Jegan figures which I anticipated to be sold as A and B-variants (since you cannot do 2x6 figures in a 10-box, some are bound to be rarer than others) but availability has been quite good. The machine they put on the box cover however - the Astray Red Frame - is a real evergreen and consistent favourite among collectors and it has proved almost impossible to acquire.


Ironically, in the end I ended up having to buy a full set to get my hands on the missing Red Frame figure. At least I ended up with a nice 10-box for the trouble. Extra Jegans are always welcome too I suppose. Still, the figure itself isn't extremely priced on the secondary market; the real challenge is still the green ZAKU Warrior...



121 : MBF-P02 Gundam Astray Red Frame


The basic Red Frame figure is very competently designed and features some interesting colour mixes both in the form of painted detail on armor panels as well as differently coloured parts going on top of the arms and shoulders. The paint detail on the shield is also worth of note although the soft plastic material it is made means you might end up with a slightly warped item to work with. (Pay no mind to the back pack being upside down on that picture by the way...)


The Red Frame features two red coloured sprues of joints and hands which are part of the colouration success. Don't go breaking these as they will be a real hell to replace. The figure comes with the Type 71 Beam Rifle which is usually not the weapon you would first think of when you hear "Astray Red Frame" but come on, Bandai needs you to buy those equipment packs, so you will find the Gerbera Straight katana there. On the plus side, the Type 71 rifle is used by the mass-production type M1 Astray and you could do a semi-decent variant of it using parts of the backpack in the equipment parts but that is mostly a theoretical concern as there is no way in hell you can army build these figures unless you are 3D-printing them somehow...






122 : MBF-P03 Gundam Astray Blue Frame


The blue P03 belongs to the same prototype batch as the Red Frame and so it is mostly just a colour-swapped version of the Red Frame. The main difference is that it is armed with a 500mm M68 recoilless rifle and it has a couple more options in the equipment pack. Notice also the uniquely coloured blue sprues of connector pieces, treat them very carefully as replacing them will be hard.


I wouldn't have minded seeing the M71 beam rifle with this figure and the M68 bundled with the rest of the Full Weapon Form gear in the equipment pack but I guess this was a strict cost saving decision that I can accept.






123 : RGM-89 Jegan


We get not one but two army-builder suits in this wave although they are really minor variations on the same platform. The Jegan is at the forefront of a line of very capable looking E.F.S.F. mass-production type suits culminating in monsters like the ReZEL and Jesta, a giant leap forward from the GM-family designs. The Ensemble figure itself is very green (let's face it, the original design is very clean) and so it will benefit from whatever type of panel-lining you are willing to give it. The two-colour shield looks really sharp however, especially with the black underside component.


Any mass-production figure benefits from gear choices and this is where I would have appreciated at least a beam saber option with the Jegan figure. There isn't even the bog-standard toothpick beam saber in the equipment pack but hopefully you have amassed a number of them if you have been collecting Ensemble for a while. If not it can pay to shop around for several of the old equipment packs as these are typically what remain as unwanted left-overs on the secondary market.






124 : RGM-89D Jegan D-Type


The D-Type Jegan is an organic improvement of the original design that extends the suit's service life into the Mobile Suit Gundam Unicorn-era since its introduction in Char's Counterattack. Just like wit the Red and Blue Frame figures Bandai are building on an existing design although these two figures actually have some subtle sculpt and colour changes. The easiest way to tell them apart is the different colour on the upper part of the feet, the redesigned shoulders (which are now intended to function as weapon pylons) are another thing to look out for.


The two Jegan figures come with the same basic beam rifle and shield. At least you can never have too many beam rifles so this works for me even though a secondary beam saber would have been nice. There is no extra gear for the Jegan in the equipment pack since it is all focused on the Red- and Blue Frame figures.


Side by side of the RGM-89 and the RGM-89D Type D. Most of the changes were internal between the two types but it is nice to have both options (together with the old Stark Jegan figure this makes a really nice family). In the squad assembled below I have stolen a beam bazooka from one of the myriad of Ensemble Unicorns which I think is a pretty nice fit. Currently pondering on building another basic Jegan and give it the Blue Frame's recoilless rifle for added variation...






125 : Astray Powered Red equipment pack


Two packs to go and from here on it will be all Astra-option parts. First out is the really unconventional Powered Red arm replacement for the Red Frame. I don't know what the author of SEED Astray R was smoking when they came up with a 150 meter long sword to be wielded by the mobile suit when attached to an enormous power loader machine (a figure by the way, that Bandai wasted precious resources on developing for the Ensemble line rather than say, a GINN). The way the story goes the Powered Red upgrade boosts the mobile suit's power output enough to wield the 150 meter sword without said power loader. Bandai actually supply two specific holding hands with this package that I assume are intended to wield the "150 Gerbera Straight" sword that comes with the EX32 Power Loader figure (I don't own it and so cannot confirm). Also included is a pair of transparent adapters so that you can mount the two arms to the standard Ensemble figure base when not in use.


These arms are pretty complex as far as components go. Luckily Bandai have now uploaded video build instructions to their Ensemble page (tip: download these from youtube before the Ensemble line is retired, who knows what Bandai will do with the build instruction videos then). Still, even though a lot of effort has gone into these build instruction videos it can still be difficult to see what is going on at times, especially when it comes to black components that tend to blur into a mess. In typical Bandai fashion, the instruction videos have their comments disabled - you'd think that could be a natural forum for buyers to help each other out...


To equip the Powered Red pack, remove the red frame's arms and back pack. The new arms attach directly to the torso and you get a new red piece to close the back pack section off and instead attach the back pack to the back skirt. Note the extra large hands on the Powered red arms.


Honestly, this thing is a bit grotesque. The figure design is really nice though, with lots of attention to detail and armor components that attach to the arms. The shoulder section joints are very tight but I imagine you should be able to fold down the big shoulder pads to the sides of the arms as well (the instruction video does not cover this). Now that I think of it I actually have a spare set of arms, perhaps I should try to build those with that configuration and try it out, rather than risking damage to the joints on this particular figure.



126 : Equipment Set for Wave 19


Next up we have the regular equipment set for this wave and it contains even more components for the Red Frame figure, as well as the remaining gear needed for the Blue Frame's Full Weapon Form. Again, I felt a bit lost at sea without the online build instructions and several of the flight pack components are very thin. Be extra careful with the lower fin section components that are very brittle and need to be cut from them sprue diagonally. If you don't pay attention and attempt to stick a square peg into the hole these things look like they could snap off without warning.


Good news here, the attachments for the Red Frame are add-ons to the basic design and so no parts-conversion is needed to use them. You have to remove the existing back pack to attach the flight pack and the sword sheath simply attaches to the left knee peg hole.


The Astray Red Frame was a good looking figure from the start but they are really killing it with this flight pack. The figure is now so busy looking that you almost do not notice the katana. You can draw the weapon from its sheath and equip it but the component is all lack and pretty unremarkable and so I think it looks best on the hip. These accessories are of course interchangeable with the Astray Blue Frame.


Interestingly, the katana even comes with a different connector piece that lets you mount the sword to the back of one of the Powered Red's arms. It still looks ridiculous but the playability factor is spot on. There is even an extra two-peg connector piece that I assume is intended to allow you to store a second weapon on the back of the other arm (although this is speculation on my part because Bandai forgot to include it in their build videos).


Recently there was a comment on the Destiny Gundam review by a user who thought the figure had arms that were too big. I can only speculate what the same user would think of this particular figure...


Next we switch to the Astray Blue Frame. it receives a new back pack with two 8-tube missile launchers as well as two 3-tube M68 Pardus missile launchers to be attached to the legs, lanchers normally used by Z.A.F.T.'s GINN forces. Too bad we don't have such a figure in the Ensemble line (hint, hint, Bandai...)


The figure looks really sharp with the yellow missile pods. Notice how the back pack is moved down to the back skirt just like on the Powered Red figure. I switched out the M68 Cattus recoilless rifle for the spare Astray red's beam rifle to mix things up a little.


If you are a skilled painter I guess you could repaint either of the Red- or Blue Frame figures to represent the other Orb Union prototype machines (MBF-P01 Gold Frame, P04 Green Frame or P05 Mirage Frame), perhaps this is also a reason why the figures are so rare. Either that or someone out there is trying to customize and build an Orb Union MBF-M1 Astray army (I know I would if I could...)..




Conclusion

Ensemble Part 19 is a great figure set with four killer mobile suits. While I am not sold on the Powered Red concept myself everything is well realized in figure form and you have a whole lot of gear for the two Astray machines to play with. The Jegans are of course also very worthy to collect and go well together with all the other Ensemble figures we have seen from the Char's Counterattack era. It is a pity that these figures are so hard to come by, but with Bandai reissuing some of the early waves recently perhaps it will also make its triumphant comeback.

Sunday, 7 August 2022

Mobile Suit Ensemble EX 37 : FA-010S Full Armor ZZ Gundam


Ensemble sure loves its premium figures and this is the fifth EX-figure released in 2022, with at least four more following or planned and the full releases schedule for 2022 isn't even out yet. The figure was shipped to customers in June and had a price of ¥5500 which is somewhere around the low-to-medium price range as far as the Ensemble figure goes nowadays, which is pretty insane. I grabbed mine on the secondary market where inflation had carried it to ¥7000. Collecting Ensemble figures has become very expensive hobby indeed.


What is up with the Bandai Namco logo by the way? I've seen it crop up on more and more Gundam products. In Ensemble it has begun appearing on the EX-range figures starting with this one. At first I thought there might be some company re-structuring going on but it is not obvious to me after googling. If anyone has any insights I would be interested to know.


We have seven bags loaded with parts for what may seem a rather complex build. Actually a lot of parts come down to the option of building the Full Armor Gundam or the MSZ-010S Enhanced ZZ Gundam. This requires a fair bit of parts swapping and at first I wondered if it would be cool to purchase two figures and keep one of each. Then I started to think that "hey, this must just be the ZZ-Gundam figure from wave 17 again?". I'm not very familiar with the ZZ and I couldn't remember it being branded as the Enhanced Gundam in the previous release. This made me rather confused, time for some more research...


Comparison of the base ZZ Gundam, the Enhanced ZZ Gundam upgrade and the Full Armor variant. There are some subtle differences between the MSZ-010 and the MSZ-010S, the art-style is a bit different between the two but most of the components appear to be the same. According to the Gundam Wiki, the main changes include larger shoulder binders and different backpacks.


Here you can see the parts for Mobile Suit Ensemble 103 and 104 - the ZZ Gundam Core Top and Core Base - respectively. All the components seen here appear to be here in the EX-figure pack again, some of the joint pieces come on new sprues but that's about it. The fact that we only get the smaller shoulder binders with these figures leads me to say that the original release is indeed the base ZZ Gundam and so technically you can build the MSZ-010S figure by changing one or two components out but for such a small difference I definitely won't bother. I will be recycling some of the images from the Ensemble Part 17 review, starting right here:


This is the basic ZZ Gundam from Ensemble Part 17. Notice that the blue colour used here is slightly lighter than the parts in the EX-set. I can build this very same figure with the components from the EX-box and if I replace the shoulder binders with the larger ones (and maybe switch the backpacks around, still not 100% certain about that part) it should net the MSZ-010S ZZ Gundam. Sorry for being a bit lazy and not assembling it from the EX-figure components but I honestly can't be bothered and I don't like to wear out the joints if I don't need to.


The original Core Top and Core Base figures were mobile armor components and figures in their own right, parts are even included to build the ZZ Gundam's Core Fighter. Bandai didn't bother covering these in the EX-figure build instructions for some reason but still include the components. I would definitely recommend seeking out the original retail figures for these configurations as they will be a lot cheaper.


Ok, with that out of the way let's get back to the main program. Here is the new Full Armor ZZ Gundam figure as assembled from the components in this box. It utilizes clip-on body armor on the legs and arms and looks suitably beefy. The new and larger backpack now features two missile pods that open and close and show an impressive number of teeth inside. The pack has three connector points; two attach to the standard backpack mounts on the figure's back and the last peg attaches to the backskirt. This creates a sturdy figure and the large feet help it stand up properly. Bandai includes a small rectangular-ish base with the standard attachment component so that you can get it into a floating pose. I didn't bother messing with it here as removing a figure from the Ensemble base often results in you tearing the figure apart at the waist...


The main signature weapon of the Full Armor ZZ is of course its stupidly named Hyper Mega Cannon. You attach it to the backpack by removing one of the two missile launchers and let it hang forward. The weapon also has an articulated handlebar for the figure to grip it. I don't know if Bandai intended for the figure to hold the weapon while it is still attached to the backpack or if we are intended to cheat and decouple it from the backpack when it is being hand held. Either way I am well familiar with the frustrations of lining these up from the Converge and Assault Kingdom figures and I am quite happy with just letting the gun dangle from the backpack here.


Here is a side-by-side of the basic ZZ Gundam from Ensemble Part 17 and the Full Armor Gundam. The picture is nearly representative of the two figures you can build out of the box. With the advent of the FA-010S figure Bandai now has the option to create a white FA-010A FAZZ colour variant as a really premium figure, I wonder if they will take the bait. I would certainly purchase one.

In conclusion, the Full Armor ZZ Gundam figure is a nice kit and on the gentler side of premium Ensemble kits as far as your wallet is concerned. Still, unless you are a real ZZ-aficionado you may find that money spent elsewhere might get more interesting variation out of your pricy Ensemble collection.