Gundam STANDart volume 13

Continuing down the line of STANDart the turn has come to wave thirteen, which was released in May 2012. Associated with this set is also one special version of number 48, which may have been released at the same time or some time later, I do not have any detail information regardng this at hand. The set itself is hardly revolutionizing, consisting of three Gundams and a Zaku II, though not the same one as seen in volume one. Let's dig our teeth into the set.

048 : Poster-boy for volume thirteen is easily the most striking figure in the wave, and as far as Gundams go, it is quite the looker as well. We're talking about the ZGMF-X10A Freedom Gundam from Gundam SEED. This is in my opinion one of the most successful designs from an esthetic perspective. It features a very stylish and balanced colour scheme with lots of fine details. Both the beam rifle and the shield are multi-coloured which adds even more oomph to the figure. Aticulation is typical for STANDart, you can rotate the head a bit, the arms at the shoulder and the right-hand wrist., You can also unfurl its wings fully and they will stay in position. Some back-heavy STANDart figures have a small transparent support for it to lean against but none is included with the Freedom Gundam, and on a plain surface you should have little problem balancing it as well.

049 : Checking in at slot fortynine is one of the most iconic Gundam mobile suits of all time, the notorious Zeon MS-06 Zaku II. There are so many versions and colourings of this figure, for this entry though, Bandai sticks with a common light green version, equipped with the equally iconic Zaku Machine Gun. STANDart has already featured another light green Zaku II, the MS-06J Ground Type version (released in the very first volume bacj in November 2007) which is a more sturdy looking machine than this sleek model. Its articulation is very basic, you can rotate the arms but the head has nowhere to go between the large shoulders. Overall a slightly unremarkable figure but a given for any serious STANDart collection.

050 : Rounding off the set is a pair of rehashes from STANDart volume one. We're talking another classic figure here, the white RX-178 Gundam Mk-II [A.E.U.G]. The mobile suit is armed with a huge Hyper Bazooka and a nicely sculpted shield. This is also a great and menacing looking Gundam with many nice details, including the nice colouring of its weapons. Articulation is the traditional rotating heads and arms at the shoulder. Notice that this figure is very similar to STANDart number three, which came with a beam rifle in hand and the bazooka on the back. More about that in a second.

051 : Last of the regular figures in the set is a blue version of figure number 050, the RX-178 Gundam Mk-II [Titans] which as you can see is simply a different paint job of the previous figure. The Titans version looks just as great as the A.E:U.G. one and taken on their own they are both good additions to your collection. However, once you put things in perspective and consider the previous release of these two figures in STANDart volume 1 (together with a similar looking Zaku II as well) which differ mainly in their equipment, it feels really cheap.And as if that was not enough, if the pictures of their boxes are faithful to the figures (which I do not own), it seems these newer models are also less detailed in their molds. And it goes without saying that Bandai should have done it right the first time around, and released figures which included two weapons as alternative equips.

So, as you can see I am not all too excited about STANDart volume 13. Although all the figures are great, some of them have the misfortune of correcting past mistakes. It is however a good opportunity to get yourself a STANDart RX-178 if you missed them early on, as they are now very pricey, if you can find them in the first place.

Before we conclude this overview, we'll also take a look at a limited edition figure which is associated with STANDart 13.

048 (special) : As you can see, this is a variation of the ZGMF-X10A Freedom Gundam. This particular version has received a metallic paint job and is marketed in a box with the "Limited Edition overseas only" blurb in the corner. It is not exactly clear what "overseas" actually means in the eyes of Bandai. For example, a recent overseas Unicorn made it all the way to Hong Kong where it was marketed heavily. It is also not clear just exactly how "limited" this figure is, as it is one of the more easily found on online. Regardless of which, the limited version is a stunner. It takes a beautiful model and adds some extra glamour to it. All the colours receive a metallic touch, the blues and reds looking especially good. Other than that the figure is identical to the regular version. If you are only going to own one of the two versions this is definitely the one to go for. Chances are you will find a very good deal online.

STANDart volume 13 size comparison, from left to right: Zaku II (ca 7.5 cm), Gundam Mk II (about 9 cm, not including the Bazooka) and Freedom Gundam (height about 8.5 cm).

Gundam Converge SP04 : MSN-00100 Hyaku-Shiki vs. AMX-004 Qubeley

Gundam Converge SP04 is the fifth "duel pack" released in the Converge line and hit the shelves in August 2013. It seems these sets get more and more outlandish with time as the figures tend to become more and more exotic. In the SP04 pack we meet the ol' Hyaku-Shiki with its gigantic Mega Bazooka weapon in a standoff against a garish looking Qubeley. Out of all the figures in Converge, the Qubeley is one of the largest and most crazy looking. It is quite faithful to the original design though, so I won't moan about it too much even though it is one of my least favourite figures in this line.

Parts-wise there's not a whole lot to discuss. Each figure is assembled from half a dozen components, and though each comes on sturdy feet Bandai has seen it fit to include base supports for each.

Let's begin by examining the Qubeley. With its wide stance and huge shoulder mounted binders (wasn't shoulder pads a 1980:s thing by the way...) only a few figures can match its size. It dwarves even the Hy-Gogg though the badass Zeong and Sazabi will give it a run for its money as they tower above even the Qubeley. Being compacted down to Converge size gives the Qubeley an extremely stocky appearance, and it has an enormous elongated head. The figure carriers no weapons in its hands, but has a set of ten funnel weapons mounted on the inside of its skirt.

The figure has fairly good articulation (for Converge that is), reminiscent of the Zeong. The arms rotate at the shoulder and the hands at the wrist. Although the monstrous helmet means you can't rotate the head you can unplug it from its socket and move the eyes around. It is quite gimmicky but at least gives some additional interactivity for the figure.

The Hyaku-Shiki is also pretty static in its appearance. This recent trend of posing Gundams with large weapons like in this case the oddly compact Mega Bazooka weapon means the figure can't really do much with what little articualtion it has. The figure has rotating arms at the shoulder and a rotating head. The weapon has a small hole on the backside where the hand can be attached through a peg in its palm. This at least makes the display very stable and interlocks the mobile suit with its weapon conveniently. This is the only Converge figure I have where I lift the weapon and the figure tags along rather than the opposite...

There's not a whole lot more to say about the SP04 pack. It offers very little in the form of customization, you assemble the pieces and then it just stands there. Among its redeeming factors is the chance it offers you to have the Hyaku-Shiki in your collection, as the original figure (released in the very first volume back in November 2010) is now hopelessly rare and nigh impossible to find. This however will be remedied by a re-release when the Operation Revive collection hits the shelves, currently scheduled for January 2014.

Hyaku-Shiki legacy. Two versions of the MSN-001A1 Delta Plus (from Converge volume 5 and the 2012 limited edition triple pack respectively), the MSN-001 Delta Gundam from Converge volume 10, released March 2013, and the MSN-00100 Hyaku-Shiki from SP04.

And for those who enjoy the Qubeley figure there are more good news, as Bandai has just released a triple pack called SP Qubeley which features three new variations. Comparison shots of these new models will be added to this blog entry once they find their way to my collection.

Gundam Converge vol. 12

We're taking a closer look at the latest issue of Gundam Converge figures, the twelfth series which released in October 2013. At first glance it is awfully White Gundam-intensive although there are a couple of interesting figures to mix it up a little. In terms of diversity it cannot match the beauty of volume eleven, and it seems that once volume thirteen gets going we'll see some more varied components within the release.

Anyway, enough moaning about the compilation of figures for the set, the fact is that Gundam Converge 12 is made up of several high-profile and interesting figures which do warrant a closer look.

69 : Set opener and (I presume) star of volume twelve is the MSZ-010 ΖΖ Gundam. Although there have been quite a few "white Gundams" released already in Converge it seems Bandai and FW are kicking into high gear to bring out all these well known figures. Its base colour is not white but a pale cyan which reminds of toothpaste for some reason. The many details feature a nice set of colours though each component itself can feel a bit basic in appearance. The ZZ Gundam features the typical articulation of a Gundam figure, with a rotating head and arms that rotate at the shoulder. Due to the large head though, you won't get much turning from it.

70 : The old boy RX-79(G) Gundam Ground Type finally makes its appearance in Converge. Like a couple of other recent figures it features a large gun resting on the floor. Like most Converge figures the right hand is molded directly to the weapon so you have no choice but to equip it. Again, the head rotates but tends to get stuck on the torso but you can easily unpeg and replace the head for a suitable facing. Both arms also rotate freely at the shoulder, though it will make little sense to do so for this particular figure. The Ground Type figure has a very spartan colour scheme but many nicely moulded details which help bring it to life.

71 : Halfway through the set, and here comes yet another white boy. This time it is the Gundam F91, iconic from the movie of the same name. The F91 was supposed to be the hero of an animated series but due to creative issues among the project members it was condensed into a short and somewhat diluted movie. The F91 figure itself though, is anything but diluted and is a great looking figure (though with a somewhat ridiculous posture). It features the typical rotating heads and arms.

72 : Also appearing in the F91 movie is the enemy turned ally XM-07 Vigna Ghina. Easily the most spectacular figure of this set, and a first appearance for all the figure series featured on this blog. I was really happy to see this lesser known figute make its way into Converge and I only hope that this will stimulate Bandai to see it included in the STANDart series too. As for the figure itself, FW did a really good job here, the details is striking and the colours are superb. The roman centurion look and large gun and the cruel blue visor just makes this figure look like it means business. This is an absolute must for the Converge collection.

73 : Going from spectacular to the more mundane, figure number seventy three is a well known old friend. There are some mobile suits you can count on making an appearance in any new figure line, and this is one of them. The MSM-07 Z'Gok, here in a Zeon Remnants version has been featured in Converge before. Two versions were released in the summer of 2011, Char's red one as figure 18 in the fourth wave of figures, and the typical blue one, which has sadly become a hopelessly rare item, released as number 20 in a two figure set exclusive to 7-11. So if you haven't managed to get your hands on a Z'Gok yet the olive Zeon Remnants version will be a good addition to the collection, although the previous versions have more striking colour schemes. Other than that, the figures are identical. Due to the shape of this figure the head has no articulation but the arms move (and the claws have a tendency to fall out...).

74 : The oddity of this set is hot on the heels of the previous G-P.A.R.T.S. figure, the G-Bull, which appeared in set eleven. This time we get the G-Sky fighter, which is a compact and robust flyer as opposed to many of the more delicate fighters which have been featured earlier in Converge. The G-Sky also does not come with a stand and has to sit belly down which means it doesn't really pose that well next to the mobile suits which is a shame. The one big gimmick of the G-Sky is that it combines with the G-Bull into a new figure, the G-Armor. This is not immdiately clear to you (unless you can read Japanese) as there is only a small note in Japanese on the backside of the box, with no accompanying images or instructions on how to go about to do this. I just happened to come upon an instruction the other day (via an eBay link of all things), and will be doing a separate blog entry about the G-Armor set.

Secret : Adding some more colour to the set is the secret figure, which is a variation of the Gundam F91, sometimes referred to as the Mass Production Type. Since it doesn't have a box of its own I don't really know what Bandai would call it. Any which way this is a striking design that fits very well together with the white version (I recall this pair was also featured in STANDart a long time ago). Other than the colour variation the two figures are identical.

So there you have it, ladies and gentlemen, Gundam Converge 12. Although not as striking as some earlier sets it contains a lot of interesting and well designed models. At the time of writing, these models are still readily available, so don't wait too long if you intend to pick some of them up.

STANDart: GNR-010 0 Raiser (Dengeki Hobby Magazine special)

This time we're going to take a closer look at a curiosity in the STANDart figure line. Appearing bundled with the October 2010 issue of the Dengeki Hobby magazine is this 0 Raiser accessory pack. It is a peculiar way to release a kit, it won't be of any use to you unless you also happen to already own the GN-0000 double oh Gundam figure. The parent figure itself appeared in the regular STANDart volume 7 (as number 025), and was released in August of the same year. Technically you could also apply this kit to the companion figure 026 of the same line, which features the same GN-0000 Gundam in its glowing purple mode, but the colours of the accessories would be way off.

Alright, so we've established that the 0 Raiser pack is only an accessory kit. What then, does it contain? Well, as the picture above illustrates, you get some parts which can be used to re-equip the GN-0000 Gundam with the mighty GN Sword III weapon, and the companion 0 Raiser support fighter. The primary idea behind this fighter is for it to be mounted to the Gundam figure's back, and a small support is included for the fighter to rest upon when being suspended from the figure's back.

Let's begin by examining the GN Sword III, since this is the most obvious feature. As you can see from the sequence of photographs above the blade of the sword can be stowed or extended. The accessory has the same right hand as the original beam weapon and is freely interchangeable. An interesting detail is that if you compare it to the Gundam Converge figure set, the GN Sword (in its folded position) was used as an accessory of the 0 Raiser fighter jet. For the STANDart release there is however no method to combine the sword with the fighter (which would indeed have been odd considering there is a hand molded onto the part) which is disappointing.

Once you've put the sword in place you can also choose to stow the 0 Raiser. This is done by (cumbersomely) figuring out how to dismantle the Gundam's existing shoulder pads and replacing these with the wings of the fighter craft. There are no instructions whatsoever included with the kit (perhaps some were printed in the magazine itself) and it took me some head scratching to figure out how to go about this. The fact that the only clue is the vague silhouette on the box cover also did not help.

Above you can see the two GN-0000 Gundams of STANDart 7. The blue version has been pimped with the GN Sword III and the stowed pieces of the 0 Raiser fighter, i.e. the wings replace the standard shoulder pads, and the fighter's fuselage is mounted to its back.

Turning the attention to the 0 Raiser fighter jet, it consists of a couple of pieces which can either be assembled to display the fighter, or they can be placed onto the Gundam's body as we saw earlier. While it is easy to snap together the three pieces that make up the fighter, I struggled with all the leftover pieces. I couldn't figure out how to place it on the stand, or how to attach the sword to it. And most mysterious of all, how to attach its fuselage to the Gundam figure. The answers to those questions were all disappointing. Consider the following:

a) There is no stand. Really, what were they thinking? Who in their right mind will display the fighter jet belly down on the ground? There are no holes or pegs for you to attach it to a custom stand or action base, but if you have something useful that you can balance it on, you can try. On the right hand photo I borrowed the stand for the Gundam Converge 0 Raiser craft. Although it looks silly it still beats not having any stand at all.

The picture above shows the Dengeki STANDart 0 Raiser together with its little cousin from the Gundam Converge line (figure no. 52, released December 2012). As you can see, its little brother features both a nice clear stand and a GN Sword III which attaches to its belly. Which brings us to...

b) You can't attach the GN Sword III to the 0 Raiser. This is another serious blow to the fighter. Sadly you're clearly not supposed to display it as a stand alone model. Look at the two images above. The one to the left is again a make-shift act of balancing the sleek fighter on a stand which was not designed for it, in its sword-less condition. The second photo displays what I feel the 0 Raiser should have been allowed to look like. Obviously you can see I have fiddled to great extent to create this appearance, and the only thing I do is mimicking the Gundam Converge 0 Raiser which can do all this out of the box. And, for the final nail in the coffin...

c) yes, you can attach the fighter to the Gundam figure but it looks absolutely ridiculous. Once you figure out how to do it (by removing the engine section from the fuselage and replacing it with a pegged counterpart you can snap it into a hole in the Gundam's back) you will end up with the 0 Raiser sticking out from the back like in the image above. Since you can't see it from the front, the only good it does is occupying more of your precious shelf space...

I think you can begin to see my disappointment here. The STANDart 0 Raiser should have been a beautiful display item, but instead has been relegated to being a stupid backpack. The GN Sword III is a nice touch, and I suppose you can upgrade to the bigger shoulder pads if you want your blue GN-0000 Gundam stand out a bit more from the purple version, but overall this kit is such a tremendous disappointment that I stuffed the 0 Raiser back into its box and equipped the blue GN-0000 Gundam with the sword only.

Gundam Converge 13 + 14 : RX-93 Nu Gundam

This time we take a closer look at the iconic Nu Gundam as it appears in the Gundam Converge line. The two figures were the first two in the third wave which appeared back in July 2011. The two figures complement each other in that they combine to create a "fully equipped version". This questionable quirk was also present in the STANDart line, where the two figures again occupied to slots in the series, so that us poor collectors ended up having to buy two chassis only to combine the extras into one. It does smell a bit like a petty marketing ploy, but is not entirely without merit, as we shall see.

First of all, the two chassis aren't actually perfectly identical across the two models. They *do* have different logos on their respective left shoulder armour, so if you get kicks out of this you'll be pleased to see the two different versions made.

Apart from that, the two versions are actually very good looking in their own right, they are two very balanced figures and make it possible to display different loadouts side by side, so it is not an entirely bad idea by Bandai. There's not a whole lot to say about the two figure's articulation. You can rotate the arms at the shoulder, and the right hand swivels as usual. The figure's head sits on a shaped peg which sadly prohibits turning the head which is something I wish to see permanently banned on all further Converge figures.

Above you can see the various unique components available in both sets. As is evident, there are a couple of subtle differences on some of the bodyparts. Now the fun part begins though. You can mix and match pieces to create a loadout of your choosing. This is the really fun thing about the few Converge figures that actually allow for some equipment tweaks.

Now we're getting somewhere. One of the figures has equipped itself with the beam rifle and the shield, slung the bazooka on its back and spread a nice funnel fin. With the leftover pieces the second figure goes for an unarmed and sleek appearance, though the right-hand triggerfinger does seem a bit itchy...

Now, let's add one more variable to the mix. Remember how I moaned about Bandai ought to have released a "complete" figure with all the parts in just one box? Well they did... but not in the standard line. In fact, just one month after the appearance of the Nu Gundam, in August 2011 it again hit the shelves. This time it was known as the "Fully Equipped version" packed together with the MSN-04 Sazabi in the first of the double figure sets in the SP-range, SP01.

If the idea of doing the Nu Gundam as the two figures 13 and 14 was bad, the re-release just once month later together with one of the most iconic figures in the Gundam universe was just downright evil. Especially since there was no other way to get the Sazabi, it has never been featured as a stand alone Converge figure. As a collector arriving late to the party I don't mind, but I can imagine there were a couple of buyers that ended up having to purchase more RX-93 than they had originally intended.

The story doesn't end there either. Stay tuned now for the coming "Operation Revive" reissue which will take place in the beginning of 2014. The Nu Gundam was voted as one of the top "bring 'em back"-figures so apparently the thirst for this now hard to find figure isn't yet filled. Unlike the two releases from 2011 (which vary only in colour), the 2014 version will feature a beam rifle only, but will come with two fully deployed fin funnels which will be a welcome edition to the collection. As for the older figures, I recommend you seek out the SP01 pack and only bother with the loose figures if you are a set completor.

Mobile Suits Gundam Ultimate Operation Plus 1

Yep, I have completed another Ultimate Operation set, so it is time to take a look at the first of the five expansion "Plus" sets. I don't really know the story behind why Bandai after having released ten Ultimate Operation sets decided to call this one "Plus" instead of eleven. Only three months are between this and set number ten which would seem to be the usual time between sets, so it doesn't seem to be an indication of the series having been cancelled and brought back from the dead that quickly.

Any which way, the Ultimate Operation Plus set (which I shamelessly refer to as Ultimate Operation Plus 1) appeared in September 2005 and features six figures from the Zeta Gundam storyline. And I am madly in love with it. Contained here in are simply some really excellent looking army builders and kindly enough Bandai has seen it fit two make alternate colour versions of them. Flanking these are two badass hero units, the colourful Z Gundam and the towering and wonderfully odd looking Messala. Lets get down to business and inspect the six figures that make up this set!

MSZ-006 Z Gundam : The set opens with the mighty Z. Zeta always comes out looking good and the Ultimate Operation variant is no exception. Lots of lovely colour detail on this figure and a very striking colour scheme. Standing with legs wide apart the figure balances well even though it comes loaded with bulky gear.You have the usual articulation at the head, waist, shoulders and over the elbow. The figure is equipped with the massive (BOWA) XBR-M87A2 Beam Rifle and the iconic shield. Interestingly, the Zeta also ships with an optional righthand which holds the hilt of a beam sabre. No blade is included for this weapon though. Out of all the figures in this set, the Z Gundam (unsurprisingly really) appears to be the one most difficult to find.

RMS-099 Rick Dias (red version) : Fielded by the A.E.U.G., the Rock Dias workhorse mobile suit has been given a really chunky look in the Ultimate Operation set. Armed with a Clay Bazooka the figure's arms can be manipulated so as to allow both hands to hold the weapon, but with the large chest of the figure it is a bit difficult to do so successfully. An alternate closed fist version of the right hand is also included. The legs stay in their wide spread while the waist rotates freely, as does the shoulders arms and wrists. The head can wiggle a bit from side to side. The figure also carries two beam gun weapons stowed in a rack on the back, these are not intended for active use which otherwise would have been a nice touch. Much like many FWUO figures these guns are made from soft plastic and it is likely that the figure you find will not have completely straight barrels.

RMS-099 Rick Dias (black version) : This is the alternate colour version of the Rick Dias. It has a nice black and dark blue colour scheme but otherwise shares all the characteristics of the red version. According to Zeta Gundam lore the Rick Dias was first seen in black and later red units began to pop up. The Rick Dias figures are among those you see online most often, so you should have no problem finding a good deal on these two and they really look great in the collection.

RMS-108 Marasai (red version) : Opposing the Rick Dias figures are the also great looking Marasai mobile suits. This is one of the most outrageously posed figures in the entire Ultimate Operation line, forget about a standing pose for this one. Even though the mobile suit is bending forward it still rises to almost the same height as the Z Gundam figure but if you pose it next to the recently released Marasai of the STANDart collection it looks a bit dwarfed (it doesn't help that the STANDart figure is glowing orange-red either). Articulation is fine and up to the usual FWUO standard, rotating head, waist, shoulders and arms. The left shoulder pauldron can also rotate a bit but the shield which is carried on the shoulder can not be rotated and slavishly follows the rotation of the arm. Overall I find the Marasai figure is a small and compact figure with a great look.

RMS-108 Marasai (Titans) : The alternate colour version comes in the classic two-tone blue livery of the Titans. However, the red version is sporting the Titans logo as well, so I don't really know what Bandai were thinking when they named the two versions. Apart from the colours the two versions share attributes and characteristics. I guess the only thing to point out is that the beam rifle of the blue version has a nice two-colour scheme whereas the red version has an all grey beam rifle. I should also mention that my blue figure has considerable problems standing up as soon as the surface is not 100% flat. This seems to be caused by the plastic having been slightly bent (during the years it spent packaged in its blister I presume), but my red figure handles tilting surfaces slightly better. Overall though, the Marasai is not the most stable of figures.

PMX-000 Messala : Rounding off the set is the gigantic transformable experimental Messala suit, a Titan powerhouse which stands several meters taller than the Zeta. The figure has been given a very dynamic pose which requires you to fiddle a bit with some minor assembly when you take it out of its packaging. This is one of those figures which definitely should not be allowed to remain carded, as when you take it out of the packaging and put it together it changes appearance completely. Due to its striking pose the articulation is very limited and not of much use. You can fiddle a bit with the arms but the entire body (including head) is molded as one piece. The figure comes armed with a large beam sabre which shares the characteristic of many of the FWUO soft plastic weapons,  it is probably not going to be completely straight. I normally do not pose the figure with the sabre but instead with the optional right hand fist.

Gundam Converge : SP03 - RX-78-2 Gundam vs. MSN-02 Zeong

Aside from the regular figure sets that appear in the Gundam Converge line there are also a couple of boxed sets containing more than one figure. Bandai has to my knowledge never re-packaged a figure into a set without tweaking it (even if only slightly), to give the collectors an incentive to give in. After the early limited set featuring the Exia and the Union Flag Custom in 2011 a new category appeared in the Converge line featuring several larger never before seen figures. These boxes are labelled SP:s. The sets contain both previously released (but modified) figures as well as completely brand new figures. Up until this point there have been four such sets made, depicting a pair of duelling combatants from some of the many Gundam storylines (in the near future though, the SP line will forgo the "duel" theme with a trio of Qubeley figures, but more on that set once it hits the store shelves...).

Today we will be taking a look on set number three, or SP03, which depicts the classic antagonists at the end of the very first war with Zeon. They are the classic RX-78-2 Gundam, armed with bazookas for the end battle with the half-finished Zeon experimental and massive MSN-02 Zeong suit. SP03 was released in February 2013. I have to admit that when I first laid eyes on this set I wasn't exactly thrilled. The Zeong has received an unusually cuddly look (even for a Converge figure), which didn't really convince me as it is supposed to be the most dangerous opponent in the entire Zeon force. However, I have since warmed to it for various reasons, let's begin by taking a closer look at the two figures.

As you can see in the picture above, this set allows for quite a bit of customization, something we are not spoiled with in the Converge line. While the Zeong doesn't come with any equipment (the weapons are installed in the figure's hands) it does feature a nifty stand with a ball joint, which allows for enough flexibility in posing the figure. The fact that this also suspends the Zeong in mid-air, floating on its thruster output is a really nice touch. I am not entirely convinced by the huge deer-like antennas which in my opinion could have been scaled down a little. Other than that the figure benefits from rotating shoulders, hands and head, which allow for a couple of interesting poses.

Looking at the ol' RX-78-2 Gundam, here's where things get really interesting. The Gundam comes armed to the teeth with not only a pair of bazookas, but also a shield and a beam rifle. Best of all is that you are given several choices in how to make best use of this equipment. Bandai have really gone out of their way here. As you can see below it is easy to design your own personal load out according to preference.

What takes the figure even further is the fact that it has two small holes on the back, where you can attach and store the shield and beam rifle when not in use. And here's where the novelty kicks in. The beam rifle which comes delivered attached to the hand is in fact not molded into it. This enables you to mount a clean beam rifle to the figure's back, and you can even choose to go with a figure with nothing but two empty fists. Although not designed for this, with a bit of fiddling you will also be able to balance a bazooka on the figure's back, much like they are stored by several other mobile suits in the larger figure lines.

After Freedom Gundam, Wing Gundam and Buster Gundam, say hello to Packrat Gundam...

This customizability might seems nothing special for those who collect the bigger figures in the HCM Pro or MSIA lines, but for these small figures it is nothing short of a revolution. Of course this is the standard that all Converge figures really should have upheld in the first place...

It is worth noting that the RX-78-2 from the SP03 pack is very similar to the now hopelessly hard to find RX-78-2 that was released in the original figure line back in November 2010. That RX-78-2 debuted as Converge item number 01 (which came in two versions, with a standard beam rifle and as a secret version replacing the rifle with a bazooka) and also appeared again in a "Final Decisive Battle version" (volume 4, figure no. 21). The latter is of course depicting the very same battle as the figure in SP03. That figure also came with two bazookas but had no beam rifle or shield, so you can identify it by inspecting its left arm which does not have a hole for a shield like this SP03 version has.

I don't know how to identify the the original figure 01 from the one in the SP03 set, but I would imagine the original figure has no hole for a shield on its back, but that is just a guess. Finally, there is also an RX-78-2 in the Operation Jaburo multi-pack, but that figure has a green and white colour scheme so they are easy to tell apart.

"Hey man... did you see those two guys? That's the RX-78-2 from STANDart volume eleven, he was released in October 2011. That old grandpa Zeong over there is from the old Ultimate Operation 10 set, which came out already back in June 2005."

In summary, although I was a bit sceptical about the SP03 set at first it proved me dead wrong. It is a very nice addition to the Converge collection, not only because of its theme but because Bandai managed to pull off these two figures really nicely. This might even contend for my favourite SP-set so far.